Router Bit Set – 22.5° Lock Mitre
TCT Router Bits
Each router bit features diamond ground, micro-grain tungsten carbide tipped blades. This tighter micro-grain structure means the blades offer long lasting hardness and superior edge retention. The body of each bit has been turned and then milled with uncompromising precision from a single piece of 4140 high tensile steel to give perfect balance for reduced vibration and therefore smoother cuts. 4140 steel has been chosen because of its toughness, high fatigue strength, and abrasion and impact resistance. The tungsten carbide tips are then brazed onto the bodies using induction to create an extremely strong joint that safely holds under the high stresses that occur when routing. The router bits are suitable for use on softwoods, hardwoods, veneers, laminates and composite materials.
22.5° Lock Mitre Bits
These lock mitre bits feature a 22.5° cutting angle, producing a precise 45° joint, ideal for corner cupboards, cabinets, octagonal columns, containers and plant pots. Lock mitre bits create an interlocking profile which locks the joint against movement when clamped and gives a large surface area for gluing for guaranteed strength. Minimum wood thickness for these bits is 12.7mm and the maximum wood thickness is 19.1mm and they are designed for router table use only. Shanks are 1/2″.
Superior Finish and Performance
The shearing angle of the cutting edges ensure they remain in constant contact with the workpiece to allow a smoother, slicing cut which eliminates tear-out and gives a mirror finish. The bits feature right hook angles which further enhances the cut due to the fast removal of chips. These bits feature an anti-kickback design which limits the feed rate of the material being cut to decrease the likelihood of a kickback, meaning each bit conforms to strict German DIN standards to ensure maximum operator safety. ©
