Solid Carbide Router Bit – Spiral Up Cut 2 Flute with Top Bearing – D=12.7mm H=25mm L=72mm S=1/4″

Solid Carbide Router Bit – Spiral Up Cut 2 Flute with Top Bearing – D=12.7mm H=25mm L=72mm S=1/4″
Solid Carbide Router Bits
Each router bit has been precision ground from a single piece of super micro-grain solid tungsten carbide. This ultimate micro-grain carbide formulation gives the longest tool life and edge retention ensuring a very clean and accurate cut that leads to the ultimate finish. These STC router bits are suitable for use on softwoods, hardwoods, veneers, plastic materials, laminates, and composite materials.

Spiral Up Cut Bits with Top Bearing
Spiral up cut bits leave the ultimate finish when using templates. These bits have a bearing on the top of the bit meaning they can be used as a template bit to follow a pre-cut pattern or template, trimming the workpiece to copy the existing profile. The up-cut design pulls chips up and clear of the cutting area, to give the best possible finish on the bottom surface of a project.

Superior Finish and Performance
Each spiral has been specifically designed to give the optimum cutting angle to ensure the wood is sheared cleanly as well as providing efficient chip ejection. This leads to the bits running cooler during use as solid carbide dissipates heat more uniformly, even at high speeds, meaning the edges remain as sharp as possible and are retained for longer. Each bit conforms to strict German DIN standards to ensure maximum operator safety. ©